ATEN VE814AT-ATA-U

ATEN VE814AT is an HDBaseT Video Transmitter that is capable of sending HDMI signals up to 100 m over a single Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable. Featuring dual synchronous outputs, the VE814AT can transmit video signal to two remote displays and one at the local side. This HDCP 2.2-compliant transmitter meets the HDMI Specification, including 3D, Deep Color, the maximum data rate of (10.2 Gbps), and 4K video quality up to 100 m.

Superior video quality:

• 4K up to 100 m

• 1080p up to 150 m when in HDBaseT Long Reach Mode

ATEN EDID Technology -- when both transmitter and receiver sides are connected, VE814A adopts the EDID values of the display connected to the VE814AT for high-quality output

RS-232 channel – allows you to connect to serial terminals or serial devices, such as touch screens and barcode scanners

Supports wide screen format

Built-in 8 kV/15 kV ESD protection

Plug-and-play

Rack-mountable

Video Input

Interfaces 1 x HDMI Type A Female (Black)

Impedance 100 Ω

Max. Distance 3 m

Video Output

Video

Max. Data Rate 10.2Gbps (3.4Gbps per lane)

Max. Pixel Clock 340 MHz

Compliance HDMI (3D, Deep Color, 4K)

HDCP2.2 Compatible

Consumer Electronics Control (CEC)

Max. Resolutions / Distance Up to 4K@70m (Cat 5e/6) / 100m (Cat 6a/ATEN 2L-2910 Cat6); 1080p@100m (Cat 5e/6/6a)

*4K supported:

4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0);

4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4)

Audio

Input 1 x HDMI Type A Female (Black)

Output 1 x HDMI Type A Female (Black)

Connectors

Unit To Unit 1 x RJ-45 Female

Power 1 x DC Jack (Black) with locking

Environmental

Operating Temperature 0 - 40°C

Storage Temperature -20 - 60°C

Humidity 0 - 80% RH, Non-Condensing

Physical Properties

Housing Metal