C-2000B-N

Advanced Door/Gate Entry Phone Controller

The C-2000B offers two operational modes for flexibility. In the Single Line Ring Through Mode, the C-2000B allows single line phones to share a phone line with 1 to 4 entry phones. Tenants may converse with visitors and activate a contact closure to control gates or strikes. The C-2000B provides entry phone “Caller ID” and “Call Waiting Caller ID” and a “Call Waiting” tone when the phone line is in use. Tenants can enter at each location by entering a keyless entry code. In the Analog Station Dial Through Mode, the C-2000B allows 1 to 4 entry phones to share one analog PABX extension or telephone line and place outgoing calls. When a remote party answers, they can converse with visitors and activate a contact closure to control gates or strikes. Monitoring entry phones, forcing door strike relays to operate or remote programming of the C-2000B can be accomplished by calling the analog PABX extension or telephone line connected. Authorized personnel can enter at each location by entering a keyless entry code. In either operational mode, the secure relay control of the C-2000B prevents the entry phone from dialing the activation code on the keypad of the entry phone or using a hand held touch tone dialer. An auxiliary input is available for connecting a lighted doorbell switch, a common garage door opener/receiver or an auxiliary keyless entry keypad.

• Allows 1-4 entry phones to share a single telephone line with a residential or business telephone system
• Compatible with the following Viking entry phones: - E-10A, E-20B, E-30, E-32, E-35, E-40, E-50, E-60, E-65, E-70, and E-75 Phones - K-1500-7 Stainless Steel Panel Phone - K-1700-3 and K-1705-3 Phone with Keypad - K-1900-8 Stainless Steel Panel Phone with Keypad - Or use with any analog touch tone phone
• Provides entry phone activated chimes and whole house paging when used with an SLP-1 or SLP-4
• Up to 6 different keyless entry codes / “one time use” keyless entry codes per entrance
• Up to 6 master keyless entry codes for use at any entry
• Analog Station Dial Through Mode allows entry phones to connect to an analog PABX station, FXS port or telephone line
• Optional “Privacy Number” allows only selected visitors to call from an entry phone
• Provides “Caller ID” and “Call Waiting Caller ID”
• Produces “Call Waiting” tones
• Programmable entry phone Caller ID messages
• Lighted doorbell switch input to activate entry phone call
• One set of normally open and normally closed contacts available for each entry phone
• Programmable door strike activation code
• Programmable contact activation time
• Auxiliary input to activate timed auxiliary contacts