Cisco AIR-AP1852I-UXK9
Aironet 1850 Series Access Points, 4 x 4 MU-MIMO, 1.73Gbps bandwidth, WAVE 2
Key facts
- Part number
- AIR-AP1852I-UXK9
- Brand
- Cisco
- Category
- Wireless
- Price
- Contact us for pricing
- Availability
- On request — ask for a quote
Overview
The Cisco AIR-AP1852I-UXK9 Aironet 1850 Series Access Points are designed to support the high demands of enterprise environments. With 4x4 MU-MIMO technology, these access points facilitate multiple-user efficiency and enhanced throughput, supporting bandwidths up to 1.73Gbps. They are equipped with WAVE 2 and 802.11a/g/n/ac wireless standards, ensuring robust connectivity and extensive range. Ideal for high-density scenarios, the AIR-AP1852I-UXK9 enhances user experience by providing consistent, high-speed access across multiple devices simultaneously. Perfect for businesses seeking scalable, secure, and reliable wireless solutions.
Specifications
General
- Description
- Cisco Aironet 1850 Series Access Points AIR-AP1852I-UXK9, 4 x 4 MU-MIMO, 1.73Gbps bandwidth, WAVE 2, 802.11a/g/n/ac
- Software
- Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points
- Regulatory Domain
- Universal Regulatory Domain
- Deployment modes
- Centralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh
- Supported wireless LAN controllers
- Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 5760 Series Wireless Controllers, Cisco Catalyst 3650/3850 Series switch with integrated controller Cisco Mobility Express
- 802.11n version 2.0 (and related) capabilities
- 4x4 MIMO with four spatial streams Maximal ratio combining (MRC) 20- and 40-MHz channels PHY data rates up to 600 Mbps (40 MHz with 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 dynamic frequency selection (DFS) Cyclic shift diversity (CSD) support
- 802.11ac Wave 1 and 2 capabilities
- 4x4 MIMO with four spatial streams, single-user MIMO 4x4 MIMO with three spatial streams, multiuser MIMO MRC 802.11ac beamforming (transmit beamforming) 20-, 40-, and 80-MHz channels PHY data rates up to 1.7 Gbps (80 MHz in 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 DFS CSD support Rogue device detection
- Integrated antenna
- 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360° 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360°
- Interfaces
- 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) 1 x 10/100/1000BASE-T autosensing (RJ-45), AUX (used for Link Aggregation) Management console port (RJ-45) USB 2.0 (enabled via future software)
- Indicators
- Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
- Dimensions (W x L x H)
- Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm)
- Weight
- 3.12 lb (1.41 kg)
- Environmental
- Cisco Aironet 1850i Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25˚C, 15,000 ft. Operating temperature: 32° to 104°F (0° to 40°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40˚C, 9843 ft.
- System memory
- 1 GB DRAM 256 MB flash
- Input power requirements
- AP1850: 44 to 57 VDC Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz
- Power draw
- 20.9W Note: When deployed using a Power over Ethernet (PoE) specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable.
- Powering options
- 802.3at Enhanced PoE Cisco power injector, AIR-PWRINJ4= Cisco local power supply, AIR-PWR-C= Cisco power injector, AIR-PWRINJ5= (Note:this injector supports 802.3af only) 802.3af Note: If 802.3af PoE is the source of power, (1) the 1852e 2.4-GHz radio will shift to 2x3 from 3x4, (2) The USB port and AUX Ethernet port are disabled on both the 1852i and 1852e.
- Warranty
- Limited lifetime hardware warranty
Reference price history
Recorded reference and list prices over time. Not Prology selling prices.
No price history has been recorded for this part yet.
Buy or sell Cisco AIR-AP1852I-UXK9
Buying Cisco wireless
Looking to buy the Cisco AIR-AP1852I-UXK9 or a compatible wireless? Prology supplies new, refurbished and used Cisco wireless in Australia and the United States. Send the part number and quantity for a firm price.
Selling Cisco wireless
Have a spare or decommissioned AIR-AP1852I-UXK9? Prology buys used and surplus Cisco wireless — single units or whole lots — and replies with an offer within 1 business day. Sell your AIR-AP1852I-UXK9.
- What is the Cisco AIR-AP1852I-UXK9?
- The Cisco AIR-AP1852I-UXK9 is a Cisco wireless – Aironet 1850 Series Access Points, 4 x 4 MU-MIMO, 1.73Gbps bandwidth, WAVE 2.
- Where can I buy the Cisco AIR-AP1852I-UXK9?
- It is not listed on the Prology store yet. Prology sources Cisco wireless on request — request a quote and we reply with a firm price and lead time within 1 business day.
- Can I sell a used Cisco AIR-AP1852I-UXK9?
- Yes. Prology buys used and surplus Cisco wireless, including the AIR-AP1852I-UXK9. Get an offer — sell outright or trade in against your next order.
Request a quote for AIR-AP1852I-UXK9
Tell us the quantity and condition you need. Prology replies with a firm price and lead time within 1 business day.