Cisco C9117AXI-Q

General

Description

Cisco Catalyst 9117AX Access Point, Internal antenna; Wi-Fi 6; 8x8:8 MIMO, Q Domain

Software

● Cisco Unified Wireless Network Software Release 8.9 or later● Cisco IOS ® XE Software Release 16.11 or later

Supported wireless LAN controllers

● Cisco Catalyst 9800 Series Wireless Controllers● Cisco 3500, 5520, and 8540 Series Wireless Controllers, and Cisco Virtual Wireless Controller

802.11n version 2.0 (and related) capabilities

● 8x8 MIMO with four spatial streams for 5-GHz band● 4x4 MIMO with four spatial streams for 2.4-GHz band● Maximal Ratio Combining (MRC)● 20- and 40-MHz channels● PHY data rates up to 600 Mbps (40 MHz with 5 GHz)● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)● Cyclic Shift Diversity (CSD) support

802.11ac

● 8x8 downlink MU-MIMO with eight spatial streams● MRC● 802.11ac beamforming● 20-, 40-, 80, and 160-MHz channels● PHY data rates up to 3.5 Gbps at 5 GHz● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)● CSD support

802.11ax

● 8x8 MIMO with eight spatial streams for 5-GHz band● 4x4 MIMO with four spatial streams for 2.4-GHz band● Downlink OFDMA● TWT● MRC● 802.11ax beamforming● 20-, 40-, 80, and 160-MHz channels● PHY data rates up to 5 Gbps at 5 GHz● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)● CSD support

Integrated antenna

● 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth● 5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth

Interfaces

● 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz● Management console port (RJ-45)● USB 2.0 with up to 3.75W (enabled via future software)

Indicators

● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Dimensions (W x L x H)

● Access point (without mounting bracket and mounting features): 8.70 x 8.70 x 1.94 in. (22 x 22 x 4.93 cm)● Access point (without mounting bracket): 8.70 x 8.70 x 2.19 in. (22 x 22 x 5.56 cm)

Weight

● 3.02 lb (1.4 kg)

Input power requirements

● 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®)● Cisco power injector, AIR-PWRINJ6=● 802.3af PoE● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 2.5 Gbps; in addition, the USB port will be off.

Environmental

● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)● Nonoperating (storage) altitude test: 25˚C, 15,000 ft.● Operating temperature: 32° to 122°F (0° to 50°C)● Operating humidity: 10% to 90% (noncondensing)● Operating altitude test: 40˚C, 9843 ft.

System memory

● 2048 MB DRAM● 1024 MB flash

DFS

● 802.11 dynamic frequency selection (DFS)

Warranty

Limited lifetime hardware warranty

Available transmit power settings

2.4 GHz● 23 dBm (200 mW)● 20 dBm (100 mW)● 17 dBm (50 mW)● 14 dBm (25 mW)● 11 dBm (12.5 mW)● 8 dBm (6.25 mW)● 5 dBm (3.13 mW)● 2 dBm (1.56 mW)● -1 dBm (0.78 mW)● -4 dBm (0.4 mW)● -6 dBm (0.25 mW)5 GHz● 26 dBm (400 mW)● 23 dBm (200 mW)● 20 dBm (100 mW)● 17 dBm (50 mW)● 14 dBm (25 mW)● 11 dBm (12.5 mW)● 8 dBm (6.25 mW)● 5 dBm (3.13 mW)● 2 dBm (1.56 mW)● -1 dBm (0.78 mW)● -4 dBm (0.4 mW)