Cisco C9130AXE-R
Catalyst 9130 WiFi 6 Access Point
Key facts
Overview
The Cisco Catalyst 9130AX Series Access Points are the next generation of enterprise access points. They are resilient, secure, and intelligent.C9130AXE-R is the Cisco Catalyst 9130AX Series Access Point, external antennas; Wi-Fi 6; 4x4:4 MIMO, RDomain.
Cisco AP C9130AXSeries provides these features:
Wi-Fi 6 certified, supporting 802.11ax on both 2.4-GHz and 5-GHz bands
Up to four Wi-Fi radios: 5GHz flexible radio (single 8x8 or dual 4x4), 2.4GHz (4x4) and Cisco RF ASIC
OFDMA and MU-MIMO
Multigigabit support
Internal and external antenna
Future feature support:
IoT ready (BLE, other 802.15.4 protocols** like Zigbee)
** - Supported in future software releases
Supported Platforms
Table 1 shows the supported platforms and software.
Compare to Similar Items
Table 2shows the comparison of Cisco AP 9130AXESeries.
GetMoreInformation
Do you have anyquestionabouttheC9130AXE-R
Specifications
General
- Software
- Catalyst 9130AXE • Cisco Unified Wireless Network Software Release 8.10MR1 or later • Cisco IOS ® XE Software Release 17.1.1 s or later
- Supported wireless LAN controllers
- • Cisco Catalyst 9800 Series Wireless Controllers • Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
- 802.11n version 2.0 (and related) capabilities
- • 4x4 MIMO with four spatial streams • Maximal Ratio Combining (MRC) • 802.11n and 802.11a/g • 20- and 40-MHz channels • PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) • Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) • 802.11 Dynamic Frequency Selection (DFS) • Cyclic Shift Diversity (CSD) support
- 802.11ac
- • 8x8 downlink MU-MIMO with eight spatial streams • MRC • 802.11ac beamforming • 20-, 40-, 80-, and 160-MHz channels • PHY data rates up to 6.9 Gbps (160 MHz with 5 GHz) • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) • 802.11 DFS • CSD support • WPA3 support
- 802.11ax
- • 8x8 uplink/downlink MU-MIMO with eight spatial streams • Uplink/downlink OFDMA • TWT • BSS coloring • MRC • 802.11ax beamforming • 20-, 40-, 80-, and 160-MHz channels • PHY data rates up to 10 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) • 802.11 DFS • CSD support • WPA3 support
- Integrated antenna
- • 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth • 5 GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth
- Interfaces
- • 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz • Management console port (RJ-45) • USB 2.0 at 4.5W (enabled via future software)
- Indicators
- • Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
- Dimensions (W x L x H)
- • Access point (without mounting brackets): - C9130AXE: 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm)
- Environmental
- Cisco Catalyst 9130AXE • Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) • Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m) • Operating temperature: -4° to 122°F (-20° to 50°C) • Operating humidity: 10% to 90% (noncondensing) • Operating altitude test: 40˚C, 9843 ft.(3000 m)
- System memory
- • 2048 MB DRAM • 1024 MB flash
- Warranty
- Limited lifetime hardware warranty
- Available transmit power settings
- 2.4 GHz • 23 dBm (200 mW) • 20 dBm (100 mW) • 17 dBm (50 mW) • 14 dBm (25 mW) • 11 dBm (12.5 mW) • 8 dBm (6.25 mW) • 5 dBm (3.13 mW) • 2 dBm (1.56 mW) • -1 dBm (0.79 mW) • -4 dBm(0.39 mW) 5 GHz • 26 dBm (400 mW) • 23 dBm (200 mW) • 20 dBm (100 mW) • 17 dBm (50 mW) • 14 dBm (25 mW) • 11 dBm (12.5 mW) • 8 dBm (6.25 mW) • 5 dBm (3.13 mW) • 2 dBm (1.56 mW) • -1 dBm (0.79 mW)
- Maximum number of nonoverlapping channels
- 2.4 GHz • 802.11b/g: - 20 MHz: 3 • 802.11n: - 20 MHz: 3 • 802.11ax: - 20 MHz: 3 5 GHz • 802.11a: - 20 MHz: 26 FCC, 16 EU • 802.11n: - 20 MHz: 26 FCC, 16 EU - 40 MHz: 12 FCC, 7 EU • 802.11ac/ax: - 20 MHz: 26 FCC, 16 EU - 40 MHz: 12 FCC, 7 EU - 80 MHz: 5 FCC, 3 EU - 160 MHz 2 FCC, 1 EU Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain.
Reference price history
Recorded reference and list prices over time. Not Prology selling prices.
- Latest
- USD 2,791.61≈ AUD 4,039
- Oct 2022
- Lowest recorded
- USD 2,195≈ AUD 3,176
- Highest recorded
- USD 2,791.61≈ AUD 4,039
- Recorded
- 2020 – 2022
- 10 price points
- List price
- Prology US
AUD 1,201 on Prology AU, recorded
Buy or sell Cisco C9130AXE-R
Buying Cisco switches
Prology stocks the Cisco C9130AXE-R from USD 793 on Prology AU and Prology US. Need more than one, or a different condition? Request a quote for volume pricing.
Selling Cisco switches
Have a spare or decommissioned C9130AXE-R? Prology buys used and surplus Cisco switches — single units or whole lots — and replies with an offer within 1 business day. Sell your C9130AXE-R.
- What is the Cisco C9130AXE-R?
- The Cisco C9130AXE-R is a Cisco switch – Catalyst 9130 WiFi 6 Access Point.
- How much does the Cisco C9130AXE-R cost?
- The manufacturer list price on record is USD 2,791.61 (Oct 2022). It is a reference figure, not a selling price — the live price is on the Prology store page.
- Where can I buy the Cisco C9130AXE-R?
- It is listed on Prology AU and Prology US. Use the “View on Prology” button above for live price, condition and stock, or request a quote for volume pricing.
- Can I sell a used Cisco C9130AXE-R?
- Yes. Prology buys used and surplus Cisco switches, including the C9130AXE-R. Get an offer — sell outright or trade in against your next order.
Request a quote for C9130AXE-R
Tell us the quantity and condition you need. Prology replies with a firm price and lead time within 1 business day.