Cisco CISCO887V-SEC-K9
887V VDSL2 over POTS Sec Router w/ ISDN B/U
Key facts
- Part number
- CISCO887V-SEC-K9
- Brand
- Cisco
- Category
- Routers
- Price
- USD 899≈ AUD 1,292 List price (Jan 2011)
- Availability
- On request — ask for a quote
Specifications
Communications
- Digital Signaling Protocol
- VDSL2
- Type
- ISDN / DSL modem combo
Dimensions & Weight
- Depth
- 24.9 cm
- Height
- 4.4 cm
- Width
- 32.5 cm
Expansion / Connectivity
- Expansion Slots
- 1 (total) / 1 (free) x ExpressCard , 1 (total) / 1 (free) x SO-DIMM 200-pin
- Interfaces
- LAN: 4 x 10Base-T/100Base-TX - RJ-45 , Management: 1 x RJ-45 , WAN: 1 x VDSL2 , USB: 1 x 4 pin USB Type A , WAN: 1 x BRI ST
General
- Authentication Method
- RADIUS, TACACS+
- Capacity
- IPSec VPN tunnels: 20
- Compliant Standards
- IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
- Connectivity Technology
- Wired
- Data Link Protocol
- Ethernet, Fast Ethernet
- Device Type
- Router - 4-port switch (integrated)
- Enclosure Type
- Desktop
- Encryption Algorithm
- DES, Triple DES, SSL, PKI, 128-bit AES, 192-bit AES, 256-bit AES
- Features
- Firewall protection, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), content filtering, MAC address filtering, Broadcast Storm Control, IPv6 support, Stateful Failover, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), Dynamic Multipoint VPN (DMVPN), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy
- Flash Memory
- 128 MB
- Network / Transport Protocol
- L2TP, IPSec, PPPoE, PPPoA
- RAM
- 256 MB (installed) / 768 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin
- Remote Management Protocol
- Telnet, SNMP 3, HTTP, HTTPS, SSH
- Routing Protocol
- OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, GRE
- Status Indicators
- Port status, power
Power
- Power Device
- External power adapter - 60 Watt
- Voltage Required
- AC 120/230 V (50/60 Hz)
Software / System Requirements
- OS Provided
- Cisco IOS Advanced IP services
Reference price history
Recorded reference and list prices over time. Not Prology selling prices.
- Latest
- USD 899≈ AUD 1,292
- Jan 2011
- Lowest recorded
- USD 899≈ AUD 1,292
- Highest recorded
- USD 899≈ AUD 1,292
- Recorded
- 2010 – 2011
- 2 price points
Buy or sell Cisco CISCO887V-SEC-K9
Buying Cisco routers
Looking to buy the Cisco CISCO887V-SEC-K9 or a compatible router? Prology supplies new, refurbished and used Cisco routers in Australia and the United States. Send the part number and quantity for a firm price.
Selling Cisco routers
Have a spare or decommissioned CISCO887V-SEC-K9? Prology buys used and surplus Cisco routers — single units or whole lots — and replies with an offer within 1 business day. Sell your CISCO887V-SEC-K9.
- What is the Cisco CISCO887V-SEC-K9?
- The Cisco CISCO887V-SEC-K9 is a Cisco router – 887V VDSL2 over POTS Sec Router w/ ISDN B/U.
- How much does the Cisco CISCO887V-SEC-K9 cost?
- The manufacturer list price on record is USD 899 (Jan 2011). It is a reference figure, not a selling price — ask Prology for a firm quote.
- Where can I buy the Cisco CISCO887V-SEC-K9?
- It is not listed on the Prology store yet. Prology sources Cisco routers on request — request a quote and we reply with a firm price and lead time within 1 business day.
- Can I sell a used Cisco CISCO887V-SEC-K9?
- Yes. Prology buys used and surplus Cisco routers, including the CISCO887V-SEC-K9. Get an offer — sell outright or trade in against your next order.
Request a quote for CISCO887V-SEC-K9
Tell us the quantity and condition you need. Prology replies with a firm price and lead time within 1 business day.