Cisco CISCO887VA-SEC-K9
887 VDSL/ADSL over POTS Multi-mode Router w/ Adv IP
Key facts
Specifications
Communications
- Digital Signaling Protocol
- ADSL2+, VDSL2
- Protocols & Specifications
- ITU G.994.1 (G.hs), ITU G.992.1 (G.DMT) Annex A, ITU G.992.3 Annex A, ITU G.993.2, ITU G.992.5 Annex A
- Type
- DSL modem
Dimensions & Weight
- Depth
- 24.9 cm
- Height
- 4.4 cm
- Weight
- 2.5 kg
- Width
- 32.5 cm
Expansion / Connectivity
- Expansion Slots
- 1 (total) / 1 (free) x ExpressCard , 1 (total) / 1 (free) x SO-DIMM 200-pin
- Interfaces
- LAN: 4 x 10Base-T/100Base-TX - RJ-45 , Management: 1 x console - RJ-45 , WAN: 1 x ADSL2+ , USB: 1 x 4 pin USB Type A , WAN: 1 x VDSL2
General
- Authentication Method
- RADIUS, TACACS+
- Capacity
- IPSec VPN tunnels: 20
- Compliant Standards
- IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
- Connectivity Technology
- Wired
- Data Link Protocol
- Ethernet, Fast Ethernet
- Device Type
- Router - 4-port switch (integrated)
- Enclosure Type
- Desktop
- Encryption Algorithm
- LEAP, DES, Triple DES, MD5, TLS, PEAP, TTLS, TKIP, WPA, WPA2, WPA-PSK, PKI, 128-bit AES, 192-bit AES, 256-bit AES
- Features
- Firewall protection, auto-sensing per device, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy
- Flash Memory
- 128 MB
- Network / Transport Protocol
- L2TP, IPSec, PPPoE, PPPoA
- RAM
- 256 MB (installed) / 768 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin
- Remote Management Protocol
- Telnet, SNMP 3, HTTP, HTTPS, SSH
- Routing Protocol
- OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, IGMPv3, GRE
- Status Indicators
- Port status, power
Power
- Power Device
- External power adapter - 60 Watt
- Voltage Required
- AC 120/230 V (50/60 Hz)
Software / System Requirements
- OS Provided
- Cisco IOS Advanced IP services
Reference price history
Recorded reference and list prices over time. Not Prology selling prices.
- Latest
- USD 849≈ AUD 1,215
- Jan 2011
- Lowest recorded
- USD 849≈ AUD 1,215
- Highest recorded
- USD 849≈ AUD 1,215
- Recorded
- 2011
- 1 price point
USD 849 list price, recorded
AUD 447 on Prology AU, recorded
Buy or sell Cisco CISCO887VA-SEC-K9
Buying Cisco routers
Prology stocks the Cisco CISCO887VA-SEC-K9 from AUD 447 on Prology AU. Need more than one, or a different condition? Request a quote for volume pricing.
Selling Cisco routers
Have a spare or decommissioned CISCO887VA-SEC-K9? Prology buys used and surplus Cisco routers — single units or whole lots — and replies with an offer within 1 business day. Sell your CISCO887VA-SEC-K9.
- What is the Cisco CISCO887VA-SEC-K9?
- The Cisco CISCO887VA-SEC-K9 is a Cisco router – 887 VDSL/ADSL over POTS Multi-mode Router w/ Adv IP.
- How much does the Cisco CISCO887VA-SEC-K9 cost?
- The manufacturer list price on record is USD 849 (Jan 2011). It is a reference figure, not a selling price — the live price is on the Prology store page.
- Where can I buy the Cisco CISCO887VA-SEC-K9?
- It is listed on Prology AU. Use the “View on Prology” button above for live price, condition and stock, or request a quote for volume pricing.
- Can I sell a used Cisco CISCO887VA-SEC-K9?
- Yes. Prology buys used and surplus Cisco routers, including the CISCO887VA-SEC-K9. Get an offer — sell outright or trade in against your next order.
Request a quote for CISCO887VA-SEC-K9
Tell us the quantity and condition you need. Prology replies with a firm price and lead time within 1 business day.