Cisco N6001P-4FEX-1G
N6001P CHASSIS WITH 4 X 1G - Switch - Switch
Key facts
- Part number
- N6001P-4FEX-1G
- Brand
- Cisco
- Category
- Switches
- Price
- USD 62,000≈ AUD 88,289 List price (Jan 2015)
- Availability
- On request — ask for a quote
Specifications
Dimensions & Weight
- Depth
- 76.2 cm
- Height
- 4.4 cm
- Weight
- 14.51 kg
- Width
- 43.9 cm
Environmental Parameters
- Max Storage Temperature
- 70 °C
- Min Storage Temperature
- -40 °C
Expansion / Connectivity
- Interfaces
- 4 x 40Gbit LAN QSFP+ , 48 x 10Gbit LAN SFP+ , 1 x management
General
- Authentication Method
- RADIUS, TACACS+
- Capacity
- Virtual interfaces (VLANs): 4096 , ACL: 4000 , IPv4 routes: 8000 , IGMP groups: 8000
- Compliant Standards
- IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1Qbb, IEEE 802.1Qaz
- Device Type
- Switch - L3 - Managed - with 4 x Cisco Nexus 2248TP-E GE Fabric Extender, 32x 10G SFP+ module (FET-10G)
- Enclosure Type
- Rack-mountable 1U
- Features
- VLAN support, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Equal-Cost Multipath (ECMP), Rapid Per-VLAN Spanning Tree Plus (PVRST+), DHCP relay, Link Aggregation Control Protocol (LACP), Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF)
- Jumbo Frame Support
- 9216 bytes
- MAC Address Table Size
- 256K entries
- Performance
- Forwarding performance: 1.28 Tbps
- Ports
- 48 x 10 Gigabit SFP+ + 4 x QSFP+
- Remote Management Protocol
- SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI
- Routing Protocol
- RIP-2, BGP, EIGRP, IGMPv2, HSRP, VRRP, OSPFv2, PIM-SM, IGMPv3, EIGRP for IPv6, OSPFv3, MSDP, static IPv4 routing, static IPv6 routing
- Subtype
- 40 Gigabit Ethernet
Miscellaneous
- Compliant Standards
- CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, GB 4943, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, EN 300 386
Power
- Features
- Front-to-rear air?ow
- Power Device
- Internal power supply - hot-plug
- Power Redundancy
- Yes
- Power Redundancy Scheme
- 1+1
- Voltage Required
- AC 100/230 V (50/60 Hz)
Reference price history
Recorded reference and list prices over time. Not Prology selling prices.
- Latest
- USD 62,000≈ AUD 88,289
- Jan 2015
- Lowest recorded
- USD 62,000≈ AUD 88,289
- Highest recorded
- USD 62,000≈ AUD 88,289
- Recorded
- 2014 – 2015
- 3 price points
Buy or sell Cisco N6001P-4FEX-1G
Buying Cisco switches
Looking to buy the Cisco N6001P-4FEX-1G or a compatible switch? Prology supplies new, refurbished and used Cisco switches in Australia and the United States. Send the part number and quantity for a firm price.
Selling Cisco switches
Have a spare or decommissioned N6001P-4FEX-1G? Prology buys used and surplus Cisco switches — single units or whole lots — and replies with an offer within 1 business day. Sell your N6001P-4FEX-1G.
- What is the Cisco N6001P-4FEX-1G?
- The Cisco N6001P-4FEX-1G is a Cisco switch – N6001P CHASSIS WITH 4 X 1G - Switch - Switch.
- How much does the Cisco N6001P-4FEX-1G cost?
- The manufacturer list price on record is USD 62,000 (Jan 2015). It is a reference figure, not a selling price — ask Prology for a firm quote.
- Where can I buy the Cisco N6001P-4FEX-1G?
- It is not listed on the Prology store yet. Prology sources Cisco switches on request — request a quote and we reply with a firm price and lead time within 1 business day.
- Can I sell a used Cisco N6001P-4FEX-1G?
- Yes. Prology buys used and surplus Cisco switches, including the N6001P-4FEX-1G. Get an offer — sell outright or trade in against your next order.
Request a quote for N6001P-4FEX-1G
Tell us the quantity and condition you need. Prology replies with a firm price and lead time within 1 business day.