Cisco WS-C4503-E-S2+48V
Cat4503-E PoE Bundle. 1 x 1300AC. 1 x S2.1 x WS-X4248-RJ45V
Key facts
- Part number
- WS-C4503-E-S2+48V
- Brand
- Cisco
- Category
- Switches
- Price
- USD 12,000≈ AUD 17,244 List price (June 2010)
- Availability
- On request — ask for a quote
Specifications
Dimensions & Weight
- Depth
- 31.7 cm
- Height
- 31.1 cm
- Width
- 44 cm
Expansion / Connectivity
- Expansion Slots
- 3 (total) / 1 (free) x Expansion Slot , 1 CompactFlash Card
- Interfaces
- 48 x 100Base-TX RJ-45 , 1 x console RJ-45 management , 1 x 100Base-TX RJ-45 management , 2 x GBIC
General
- Authentication Method
- Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2)
- Compliant Standards
- IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ad
- Device Type
- Switch - 48 ports - L4 - Managed - with Cisco Catalyst 4500 Series Supervisor Engine II-Plus (WS-X4013+), Cisco Line Card (WS-X4148-RJ)
- Enclosure Type
- Rack-mountable 7U
- Features
- Modular design, Layer 4 switching, Layer 3 switching, Layer 2 switching, ARP support, VLAN support, IGMP snooping, Syslog support, IPv6 support, Access Control List (ACL) support, Quality of Service (QoS)
- Flash Memory
- 32 MB Flash
- MAC Address Table Size
- 32K entries
- Ports
- 48 x 10/100 + 2 x GBIC
- Processor
- 1: 266 MHz
- RAM
- 256 MB
- Remote Management Protocol
- SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTPS
- Routing Protocol
- RIP-1, RIP-2, IGMPv2, HSRP, IGMP, DVMRP, VRRP, static IP routing, IGMPv3, PIM-SSM
- Status Indicators
- Port status, power, link OK, active, status
- Subtype
- Fast Ethernet
Miscellaneous
- Compliant Standards
- NEBS level 3, FCC Class A certified, CISPR 22 Class A, EN 60950, EN 61000-3-2, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, CSA 22.2 No. 60950, EN 61000-6-1, ACA TS001, FCC Part 68, AS/NZ 3548 Class A, ICES-003 Class A, CS-03, FCC CFR47 Part 15
- Rack Mounting Kit
- Included
Power
- Power Device
- Internal power supply
- Power Redundancy
- Yes
- Voltage Required
- AC 120/230 V (50/60 Hz)
Reference price history
Recorded reference and list prices over time. Not Prology selling prices.
- Latest
- USD 12,000≈ AUD 17,244
- June 2010
- Lowest recorded
- USD 12,000≈ AUD 17,244
- Highest recorded
- USD 12,000≈ AUD 17,244
- Recorded
- 2009 – 2010
- 2 price points
Buy or sell Cisco WS-C4503-E-S2+48V
Buying Cisco switches
Looking to buy the Cisco WS-C4503-E-S2+48V or a compatible switch? Prology supplies new, refurbished and used Cisco switches in Australia and the United States. Send the part number and quantity for a firm price.
Selling Cisco switches
Have a spare or decommissioned WS-C4503-E-S2+48V? Prology buys used and surplus Cisco switches — single units or whole lots — and replies with an offer within 1 business day. Sell your WS-C4503-E-S2+48V.
- What is the Cisco WS-C4503-E-S2+48V?
- The Cisco WS-C4503-E-S2+48V is a Cisco switch – Cat4503-E PoE Bundle. 1 x 1300AC. 1 x S2.1 x WS-X4248-RJ45V.
- How much does the Cisco WS-C4503-E-S2+48V cost?
- The manufacturer list price on record is USD 12,000 (June 2010). It is a reference figure, not a selling price — ask Prology for a firm quote.
- Where can I buy the Cisco WS-C4503-E-S2+48V?
- It is not listed on the Prology store yet. Prology sources Cisco switches on request — request a quote and we reply with a firm price and lead time within 1 business day.
- Can I sell a used Cisco WS-C4503-E-S2+48V?
- Yes. Prology buys used and surplus Cisco switches, including the WS-C4503-E-S2+48V. Get an offer — sell outright or trade in against your next order.
Request a quote for WS-C4503-E-S2+48V
Tell us the quantity and condition you need. Prology replies with a firm price and lead time within 1 business day.