UBIQUITI UA-G2
UniFi Access Reader G2, Entry/Exit Messages
Key facts
Overview
Description:
The UA-G2 is a second-generation UniFi Access reader that provides secure entry to buildings through NFC, PIN, and biometric authentication methods. It is designed for seamless integration with the UniFi Access ecosystem.
Specifications
Mechanical
- Dimensions
- 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")
- Weight
- 82 g (2.9 oz)
- Enclosure material
- Polycarbonate, glass
- Mounting
- In wall, gang box
- Weatherproofing
- IP55
Hardware
- Networking interface
- (1) 10/100 MbE RJ45 port
- Connectivity
- BLE 4.1
- Power method
- PoEUL 294 Power-limited Class 2 PSUUL 60950-1/62368-1 LPS/PS2 PSU
- Supported voltage range
- 48V DC
- Max. power consumption
- 5W
- ESD/EMP protection
- Air: ±15kV, contact: ±8kV
- Sensors
- Proximity sensor
- Speaker
- (1) 8 ohm, 0.7W
- Button
- (1) Factory-reset
- NFC frequency
- 13.56 MHz
- NFC read range
- < 30 mm
- NFC standards
- ISO 14443A, 14443B, 15693
- NFC technology
- NFC Tag 1,2,3,4,5MIFARE ClassicMIFAREPlusMIFARE UltralightMIFARE DESFire
- Software information
- The software version of a product can be checked at
- UL 294 level
- Destructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level I
- UL 294 statement
- Compliance with IEEE 802.3 specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
- PoE cabling requirements
- Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
- CAN/ULC-60839-11-1 Grade
- Grade assignment: I
- Certifications
- CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
- Document number, and issue date and/or revision level
- UA-G2/UA-G2-Black, V02
Software
- Management application
- UniFi Access: Version 1.5.9 and later
Reference price history
Recorded reference and list prices over time. Not Prology selling prices.
- Latest
- AUD 286.31≈ USD 201
- Oct 2026
- Lowest recorded
- AUD 286.31≈ USD 201
- Highest recorded
- AUD 286.31≈ USD 201
- Recorded
- 2026
- 1 price point
- RRP
- Prology AU
Buy or sell UBIQUITI UA-G2
Buying UBIQUITI
Prology stocks the UBIQUITI UA-G2 from USD 256 on Prology AU and Prology US. Need more than one, or a different condition? Request a quote for volume pricing.
Selling UBIQUITI
Have a spare or decommissioned UA-G2? Prology buys used and surplus UBIQUITI — single units or whole lots — and replies with an offer within 1 business day. Sell your UA-G2.
- What is the UBIQUITI UA-G2?
- The UBIQUITI UA-G2 is an IT hardware part from UBIQUITI – UniFi Access Reader G2, Entry/Exit Messages. It is also listed under 810084691663.
- How much does the UBIQUITI UA-G2 cost?
- The reference price on record is AUD 286.31 (Oct 2026). It is a reference figure, not a selling price — the live price is on the Prology store page.
- Where can I buy the UBIQUITI UA-G2?
- It is listed on Prology AU and Prology US. Use the “View on Prology” button above for live price, condition and stock, or request a quote for volume pricing.
- Can I sell a used UBIQUITI UA-G2?
- Yes. Prology buys used and surplus UBIQUITI, including the UA-G2. Get an offer — sell outright or trade in against your next order.
Request a quote for UA-G2
Tell us the quantity and condition you need. Prology replies with a firm price and lead time within 1 business day.