UBIQUITI UA-SK-Elevator
Elevator Starter Kit
Key facts
Overview
Important Warranty Information: •2-Year Warranty: Current promotion running from March to December 2024, all Ubiquiti items purchased during this period come with 2 years warranty. •For items purchased outside the specified period (March to December 2024), the standard Manufacturer’s warranty duration is 1 year.
Ubiquiti Elevator Starter Kit SKU: UA-SK-Elevator Description: Connects to in-elevator readers using PoE to authorize user's floor selection. Support for up to 18 floors and digital inputs for car status and emergency. Tech Specs: Installation Guide: Features: • (1) Elevator Hub • (1) G2 Reader • (2) 2-wire PoE extender • (10) Access Cards
Specifications
UA-Hub-ElevatorMechanical
- Dimensions
- 129.3 x 244.7 x 33.6 mm (5.1 x 9.6 x 1.3")
- Weight
- 537 g (1.2 lb)
- Enclosure material
- Polycarbonate
- Mounting material
- Polycarbonate
Hardware
- Networking interface
- (4) 10/100/1000 Base-T
- Management interface
- (1) 10/100/1000 Base-T
- Power method
- PoE++UL 294 Power-limited Class 2 PSUUL 60950-1/62368-1 LPS/PS2 PSU
- Max. power consumption
- 7W (Without PoE output)
- PoE input
- (1) PoE++, 50V DC, 1.2A
- PoE output
- PoE passthrough, (4) PoE, 50V DC, total 42W
- ESD/EMP protection
- Air: ±8kV, contact: ±4kV
- Digital input
- (5) Car position(6) Car status; Up/down/stop/full/door open/door close(1) Emergency
- Outputs
- (18) RelaysRating 30V DC/2A
- Buttons
- (1) Factory-resetTerminal blocks
- Certifications
- CE, FCC, IC, UL 62368-1, CSA C22.2 No. 62368-1
- LED
- White
- Connectivity
- BLE 4.1
- Supported voltage range
- 48V DC
- Sensors
- Proximity sensor
- Speaker
- (1) 8 ohm, 0.7W
- Button
- (1) Factory-reset
- NFC frequency
- 13.56 MHz
- NFC read range
- < 30 mm
- NFC standards
- ISO 14443A, 14443B, 15693
- NFC technology
- NFC Tag 1,2,3,4,5MIFARE ClassicMIFAREPlusMIFARE UltralightMIFARE DESFire
- Software information
- The software version of a product can be checked at
- UL 294 level
- Destructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level I
- UL 294 statement
- Compliance with IEEE 802.3 specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
- PoE cabling requirements
- Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
- CAN/ULC-60839-11-1 Grade
- Grade assignment: I
- Document number, and issue date and/or revision level
- UA-G2/UA-G2-Black, V02
UACC-Extender-2Wire-Tx/RxMechanical
- Dimensions
- 40 x 105 x 25 mm (1.6 x 4.1 x 1")
- Weight
- PoE in: 77 g (2.7 oz)PoE out: 79 g (2.8 oz)
- Enclosure material
- Polycarbonate
- Mounting material
- Polycarbonate
UA-G2Mechanical
- Dimensions
- 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")
- Weight
- 82 g (2.9 oz)
- Enclosure material
- Polycarbonate, glass
- Mounting
- In wall, gang box
- Weatherproofing
- IP55
UA-CardMechanical
- Dimensions
- 85.6 x 54 x 0.8 mm (3.4 x 2.1 x 0.03")
- Weight
- 5 g (0.18 oz)
- Format
- ISO 7810 ID-1
- NFC frequency
- 13.56 MHz
- NFC technology
- ISO/IEC 14443 Type AMIFARE DESFireUniFi Access Proprietary Security Protocol
Reference price history
Recorded reference and list prices over time. Not Prology selling prices.
- Latest
- AUD 1,782≈ USD 1,240
- Oct 2026
- Lowest recorded
- AUD 1,782≈ USD 1,240
- Highest recorded
- AUD 1,782≈ USD 1,240
- Recorded
- 2026
- 1 price point
- RRP
- Prology AU
Buy or sell UBIQUITI UA-SK-Elevator
Buying UBIQUITI
Prology stocks the UBIQUITI UA-SK-Elevator from USD 1,414 on Prology AU and Prology US. Need more than one, or a different condition? Request a quote for volume pricing.
Selling UBIQUITI
Have a spare or decommissioned UA-SK-Elevator? Prology buys used and surplus UBIQUITI — single units or whole lots — and replies with an offer within 1 business day. Sell your UA-SK-Elevator.
- What is the UBIQUITI UA-SK-Elevator?
- The UBIQUITI UA-SK-Elevator is an IT hardware part from UBIQUITI – Elevator Starter Kit. It is also listed under 810010079152.
- How much does the UBIQUITI UA-SK-Elevator cost?
- The reference price on record is AUD 1,782 (Oct 2026). It is a reference figure, not a selling price — the live price is on the Prology store page.
- Where can I buy the UBIQUITI UA-SK-Elevator?
- It is listed on Prology AU and Prology US. Use the “View on Prology” button above for live price, condition and stock, or request a quote for volume pricing.
- Can I sell a used UBIQUITI UA-SK-Elevator?
- Yes. Prology buys used and surplus UBIQUITI, including the UA-SK-Elevator. Get an offer — sell outright or trade in against your next order.
Request a quote for UA-SK-Elevator
Tell us the quantity and condition you need. Prology replies with a firm price and lead time within 1 business day.